For the stems, wash the handles, clean, white and remove dirt / scum guides with soap and paper towel. Check ceramic rings cracked / broken guide / identification of optimum cleaning with a Q-tip. If it is cracked to hang the Q-Tip. Turn right into a warm room no. Moved from the top or guide works well.
To roll:
Wipe with a damp cloth and soap, then dry when. With a slightly oily, like it with a gun flap Oil all external, such as handles, bonds, the amount of detecting wind to move joints. It's not a bad idea, the ratchet wheel and the worm clean brush with mineral spirits or other cleaner, then oil. (I like butter role, but as a good 3 in 1 oil or sewing machine oil will work well). For the interior, I can not recommend about removing what you see when you open the coil it. The coils are too complicated for me these days, and if you have not been alleviated, do not go any further. Is this a kind of gunky to clean brush with mineral spirits, blow with compressed air if you have it, and Relube. Pivots, contacts, etc., with oil, sliding gear with the role of fat. Watch your roll chart to make sure you get all levels. Not long ago, just a drop, is usually enough. When the coil has been impregnated, it is transmitted to a good repair person for a professional job. TVP is a good forum and rebates members. I recommend not to hold the slider, if it is not working properly. This could be the service uses grease friction, unregulated fat. Be sure to put the pieces so that you can recover properly together.
Loosen the foil before storing. There are many good online tutorials, both images and UTubes. Search and find much.
Aucun commentaire:
Enregistrer un commentaire