Five Aircraft Maintenance Tips to prolong your life

( Newswire.net - DECEMBER 16 2016) - is a plane built to last decades. However, the duration of the life of an aircraft , by the number of takeoffs and landings measured are believed not. By the number of years of production

While some had actively flown in the last 20 to 30 years, some have no more than a decade lasted, it runs on the culture of maintenance of aircraft owners down.

Although a level for a certain period without a major breakthrough can work, there is a continuing need to perform maintenance to prevent the tragic failures. In fact, aircraft accidents are usually fatal.

Here are 4 tips aircraft maintenance not only to avoid catastrophic failures, but also to extend its life.

Replace defective or weak components

As expected, the components are exposed to aging aircraft wear due to continuous use. It is expected that the mechanic to get right a list of these components before maintenance and configured.

It is important that aircraft parts are high quality to avoid an unexpected break. You need to identify a reliable dealer in the supply of aircraft with a good balance of experience and credibility.

Clean the engine compartment

The engine is one of the most important parts of the aircraft. Without a sound engine, fly a plane would be a big risk. While you may wonder how it is difficult, an aircraft engine would be cleaned, this process could be transparent if you have what it takes to do so.

Essentially what. For a pair of gloves in hand, glasses and cleaning agents that are usually required varsol However, be careful not come with water or chemicals in touch to let with electrical appliances such as busbars, fuses, plugs, starter motors and generators components.

You should also keep dry vacuum, keep the vents through unblocked, lubricate the bearings and hinges, and make sure that none of these components during cleaning.

Clearing the air

Ideally, a should be carried out complete cleaning inside and outside the parts of an airplane. As you know, is a level not to use corrosion, so that a point of service dirty properly cleaned hulls.

Then you need water, towels, paint coating, degreasing, washing with soap, clean Plexiglas, advanced polymers, and wax. It is advisable bare hands if necessary to use in order towels and sponges. But remember to keep your water hose handy, since it needs a lot of water to flush the mass of land.

Following the appearance of the aircraft

Dressing the outer side of the aircraft has to do with the removal of rust and paint on the outside of the aircraft. The process improves the aesthetic value of the aircraft, as it gives it a shiny appearance.

A non-abrasive cleaner is the best way to use. This should be carefully applied so as not to remove a portion of the underlying color. Once patches and a new bright color pulled out, should be the goal of the surface protect acrylic resins that have the ability to withstand adverse conditions in aviation.

We block the advertising! (Why?)