During the construction of an engine, it is the little things that good engine and great disconnect. On the initial start-up, rapid piston seal is critical to maintain and a single cylindrical wall accelerates well lubricated this process.
During a recent trip addicts experienced engine manufacturer John Bouchard increase, the importance of clean cylinder walls emphasized promote rapid closure ring. "Any remaining dirt scratch the cylinder walls and rings are not waterproof, and it was possible."
Bouchard showed a construction of engines tip "old school": After the cylinder walls with cleanser cleaning parts brake with automatic transmission fluid (ATF) cleaned.
"ATF is not only a good lubricant, but it is very detergents which wastes including brake parts cleaner leaves comprises," said Bouchard. "Sharpens cylinders can be all kinds of waste behind ... especially sharpens ball. Old engine builders poured a little time on the ATF in the intake manifold before the engine for the first time heating up. It smokes like a train load, but the piston rings of love. "The cylinder walls with ATF cleaning is more precise to achieve the same way.
1. The cylinder walls clean air new engine block 351, right? John Bouchard boost addicts showed us a little something to make it even cleaner.
2. Both tell paper towels history. On the left side of the backlog of clean parts brake is resumed. Is that ATF extra dirt removed from the cylinder walls on the right side. Bouchard said: "I once or twice wipe with brake parts cleaner, this is followed with ATF until the cylinder walls are pretty clean."
Aucun commentaire:
Enregistrer un commentaire