Some clever tips to keep the lab equipment

The quality and condition of your laboratory equipment affect the actual performance and the results obtained. In this context, you must understand that scientific results could be jeopardized due to the lack of quick repair and good maintenance.

The importance of well-maintained laboratory equipment

It is the responsibility of a laboratory technician to regularly inspect and maintain the laboratory equipment and keep it in good working order. The usability of the laboratory equipment would mainly depend on providing fast and accurate results and accurate measurements.

Here are some expert tips for proper care and maintenance of laboratory equipment to provide accurate results with minimal response time.

Regular restoration

When renovating the equipment must be disassembled and scrupulously cleaned. Then all parts are well polished and the pipette pistons are properly lubricated. Defective parts are identified and effectively replaced. Once the restoration is complete, the burette and pipette dispensers will work like new.

Fast repair

Although certain types of devices require full replacement in many situations, you can continue to work efficiently without compromising productivity with quick and easy repairs. The replacement of parts must be done quickly. I would not buy a new car if I just had to fix a timing belt. This analogy applies to your various laboratory equipment .

Some parts of the laboratory equipment would be faster than others and require timely and adequate preventive maintenance. Devices such as centrifuges require adequate maintenance to keep them in perfect condition. If the laboratory equipment is not in excellent condition, it can be hazardous to laboratory technicians and ruin the results of experiments and laboratories using defective equipment.

calibration services

Regular and rapid calibration work is required to ensure proper maintenance of the laboratory equipment. You must perform a comprehensive preventive maintenance to avoid damaging the data. Calibration covers a variety of service levels, from standard preventive maintenance to high-precision verification specifically for cGLP or cGMP.

Regular cleaning

Regular cleaning is essential for the maintenance of laboratory equipment. It is a very simple process, but often ignored and equipment neglected. Clean the exterior of the appliance every day and clean it regularly every seven days. However, not all devices should be cleaned in the same way. Some devices require a special cleaning method. For example, in a hematology machine, the surface of the analyzer should be cleaned once a week, the HC check should be verified once a month, and an engineer should examine the entire system once every six months. In the case of a chemical machine, use the analyzer surface to clean the bottom and top heaters once a week and check Humatrol control every six months. For a microscope, it is important to clean the glass once a week with a mixture of 30% alcohol and 70% ether. Clean the lamp, lens and condenser once a month.

conclusion

The most important point to note is that the maintenance and repair of laboratory equipment should only be done by qualified and qualified staff of accredited companies. Well-trained technicians should not only clean, repair or replace defective components; You must be able to predict the possible failure of some parts.

in relation

Let's block the advertising! (Why?)