How to clean and disinfect course your iPhone

Consider for a moment the many things that our hands in contact with the day .. dirty door handles, toilet seats, handles and steering wheels, keyboards, counters, etc. - and perhaps not surprisingly, a 2012 study by the University of Arizona, Dr. , Charles Gerba microbiologist shown that our iPhone can take up to 10 - times the amount of bacteria , which in the majority of toilet seats .

As for the cleanliness of our iPhones, there are actually a number of ways to do the work; and we do not have to look beyond our own medicine cabinets to find the tools, either. can Here we offer foolproof methods for cleaning and disinfecting your iPhone using basic tools laying house land.

First, prepare your iPhone

First, prepare from your iPhone for cleaning equipment, disconnect it from the power supply and backup ports like Thunderbolt port headphones and speakers 3.5 mm tape the vital internal components from damage to protect from water.

Microfibre cloths and cotton swabs

Soft, microfiber cloths free cloth (such as used to clean a couple of glasses) are a good way to start. (Not to use) Unlike abrasive cloth, paper towels, or even a towel, these materials developed specifically to scan all sides of the device fingerprints, stains, grain and dirt.

1. Moisten a corner of the cloth with water and wipe up and down on the screen of the phone.
2. Once the area is free to remove any moisture to use dried cloth corners around the screen edges and the sides of the cleaning unit and / or excessive dirt, which have been found on the outside edge. If, when it comes with cotton swabs or buds such as cotton, also very useful to clean deeper, more difficult to crack the device, such as around the start button, the phone, and within several ports, for example. They also work very well to remove dust and crumbs inside corners of iPhone cases.
3. Take a few cotton pads and brush gently on the phone areas, cases, ports, etc. do not wet with water the top.

NOTE: In any case, if you spray water or applied directly to the surface of the iPhone. While devices like the iPhone 7 waterproof IP67 certified, it is important to note that we do not try a bath of our equipment to give here. Fabric and Q-Tips, in themselves, are meant to scan more than enough to get the unit empty.

distilled water and white vinegar solution

Unlike tap water, a solution of water and white distilled vinegar evenly 50-50 provides an additional layer of natural energy, disinfection, and certainly not just sweep dirt, but also often impossible to see bacteria lurking in surface.

1. Start mixing 1.2 ounces of distilled water and an equal amount of vinegar in a small cup or glass.
2. Following the same procedure described above, a corner of the screen immersed in this solution and in a movement upwards and dried below the screen, with the edges, the corners and the back of the handset.

NOTE: Apple strongly recommends against using any kind of household cleaning solution contains alcohol, or aerosol products ammonia or hydrogen peroxide, as they are much more likely to cause damage to the device than anything else.

advisable

Let you us block the ads! (Why?)