How to wash your car in winter without freezing it

SASKATOON - It could be the coldest day in 2020. What could be nicer than washing the car in cold weather? Jeremy Dodge spoke to auto expert Jay Thomas for advice. This interview was edited for clarity and duration.

What should we consider before we start?

I love washing the car when it is cold because if you take the time to dry it it is very cold and will keep your car clean. If you wash yourself in muddy weather, just throw money down the drain. In addition, we have a lot of salt accumulation throughout the winter of what the streets process to keep our streets safe. If you don't add salt to the water, you're protecting your investment.

What is your method

I like to start with a tire and an engine cleaner or a pre-bath if the car is really dirty. Next we will switch to high pressure soap. We'll also use the foam brush. After all, we will grow it, then we will probably also wash it without stains. One thing you don't want to do is grab this brush and scrub a dirty car. It's like putting sandpaper on the paint.

Another tip that I like a lot when washing your car: don't just spray water in random circles. Choose a panel that focuses, for example, the bonnet, and then continue with the next panel as a front fender or bumper.

Another important thing to do when washing your winter is to clean the inside of the wing. You will find a lot of garbage from what you drive.

Why clean the foam brush before use?

I like cleaning it in case someone else gets it dirty. I like throwing it on the floor, grabbing the baguette, rinsing it out and making it explode a little.

How does the vehicle protect the wax?

It protects the color from all types of contaminants on the fly, not to mention that it makes it bright and beautiful.

What's the last step

We'll rinse it off with no stains to remove extra wax or residue from the car. I like it when it's in the soft rope, just spray the dust underneath (the back entrance) or whatever is at the bottom of the door, then we'll clean it to make sure nothing freezes when it comes out.

What you do with compressed air is to surround the window frame. In the next step, we'll all shoot in the mirror. Finally, we leave the door handle a bit open and spray behind it.

It is also necessary to dry the door frame. We clean the water that has accumulated under the door to make sure nothing freezes.

Let's block the ads! (Why?)