How often to clean iron - to do and the right way

the favorite address white shirt when - suddenly! - the iron leaves traces brown sleeve. Bright!

Whether caused by burnt with spray starch, a molten resin or oxidized water in the tank, the sole of an iron must be cleaned every time it is evident rest or slide smoothly. Follow these tips Meg Roberts, president of Molly Maid to keep brand iron and clean clothes a thing of the past, cleaning, iron.

For sticky spots:

Believe it or not, the newspaper has a large iron cleaning. (Can also use or dry cotton cloths.) First, the plate in the highest position rotate (not with steam) hot and run dry iron through the paper towel until clean. If additional abrasion is required, sprinkle a tablespoon of salt on the paper and repeat. To wash the waste, run the iron over a clean, damp cloth after cooling.

For removing fatty substances:

To oil-based separate iron and let it cool to be removed. Clean the entire sole with a cloth soaked in distilled white vinegar undiluted. Rinse with a damp cloth. If oily stains remain, clean with a damp cloth and ammonia. Rinse with a damp cloth. Let dry completely.

subtitled

apply | x remove

source

share link

As a folded shirt in half the time to iron

Watch the video - a fifteen

As a folded shirt in half the time to iron

Watch the video - a fifteen

To remove stains:

• To remove mineral deposits from the sole, applying a paste of sodium bicarbonate and water in the affected areas and rubbing with a damp cloth. Wipe with a damp cloth.
• To remove mineral deposits openings, the vents rubbing with a cotton swab and a slurry of sodium bicarbonate. Use a damp cloth cotton - stem .
• When the iron when steam is used from the brown water stain on the clothes, which means it's time to clean the tank. Empty the tank and completely fill with 1/4 cup distilled white vinegar and 3/4 cup of distilled water. The rotation of the disk completely steam and run again on an old towel until the tank is empty. If the iron has a variety of spray, until no more water discolored. Fill the tank with distilled water and repeated to ensure that any residual mineral is gone.
• future stains and mineral buildup, the use of distilled water (containing no dissolved minerals) and the container emptied completely prevent, before the plate sets.

As always, follow the manufacturer's instructions for the particular disk cleaning. If you have lost your manual, check is available on the manufacturer's website, the online version.

Let you us block the ads! (Why?)