5.18.2017

Tips for a safe bathroom, clean

By BRIAN OKINDA
More by this author

The bathroom is an important room in the house, and is potentially dangerous, so great care in the use and maintenance must be taken ..

Bathrooms offer many accessories and materials that are potentially harmful to adults and children, it is important to find ways to eliminate or minimize risk.

For example, young children can drown in a little water, if left unattended in the bathtub. Similarly, the water in the sink and toilet can be dangerous, especially for young children. It is therefore advisable to monitor infants and young children in the bathroom and can not be exposed containers filled with water.

Soap and detergent can be harmful if ingested, so keep them always in drawers or cabinets where children can not reach them.

Some bathrooms are easily accessible outlets, be sure to cover with protective caps when done to avoid them electric shocks; and immediately replace used.

Minimize the use of iron, curling hair straightening or other hot appliances when children are nearby. These devices must be kept in a locked cabinet where children can not access them.

Bath chairs, toilets, sinks, slippery floors and countertops are potentially dangerous because they can lead to falls or blows, especially if not properly cleaned and dried.

To maintain hygiene and bath and safe toilets, keeping the shower curtain in tables, if not, so that the water does not not sit in use in the folds.

Vinyl curtains, shower synthetic, cotton and hemp can be cleaned with warm water and mild detergent and then immediately dried air. Spread over two towel hooks to dry or hang on the stems. The bathroom walls can be cleaned with a sponge after use to keep them dry.

Clean soap scum on surfaces with a cleaning solution, such as acid white vinegar and water. This removes tough stains, but always wear gloves and rinse surfaces.

CLEAR TUBE

used some cleaners can leave residues from the surfaces of hard bathroom, so cleaned with mild soap and simple products in the kitchen, such as sodium bicarbonate or white vinegar.

To prevent mold growth, increase the amount of light and airflow to reduce moisture. There may be a fan used while bathing and for about 30 minutes. Air conditioners and dehumidifiers are also useful. Make sure that windows remain open after a shower / bath.

But if there is mold, clean it with a mixture of bleach and water with a soft brush. They can be followed with neutral pH cleaners to remove the bleach solution on the surface.

own bath toys bacteria and mold that gives them a bath of water with vinegar. Just fill a bucket or a large bowl with hot water, add white vinegar and half a cup toy to absorb for 10 minutes. Rub lightly with a sponge and let it dry. Acetic acid stain is free from dirt, while toys disinfected.

Bath rings caused by the use of oily bath additives, giving the bathroom an unattractive appearance. Clean the tub with warm water and a little abrasive after using these products.

To remove hard water ring of the toilet bowl, pour white vinegar into the bowl and let sit for an hour before vanity and sinks.

Boilet bowl clean poured through a quarter cup of bleach into the container, so that stand for several minutes, then scrub with a toilet brush and rinse. Disinfect the cup.

placed for cleaning a blocked shower head, a plastic bag with undiluted white vinegar and filling the pouch in the shower head attached to a rubber band is used. Soaked overnight, then scrub with a brush.

Every month or two, the drainpipes rinse of fat to keep oil stains and hair clear. You can do this by cast followed by the drain ½ cup white vinegar half a cup of sodium bicarbonate. The mixture foams. Leave for a few minutes, fatty acids to dissolve and then pour boiling water to wash the dirt.

Sounds of Silence

At the end of the day we all want to relax quietly at home. Sometimes this is not possible because you have noisy neighbors. This is takes the acoustic insulation in action. Acoustic foam is ideal for this, as it prevents the noise from the neighbor's house or even in the streets, come to your home. Similarly, it is ensured that no noise escapes from home disturbing others.

"Acoustic foam is a lightweight polyurethane foam for sound-based material is used. The aim is by avoiding waste in a room in order to "improve the sound quality, Rakesh Shah, CEO says Vitafoam products it deals with this type of foam.

"This requires a strategic placement of foam panels on the walls, ceiling and floor, the resonance effectively eliminated in the room. The foam of size can be cut and must be installed quickly and easily, Shah said, adding that it is also pocket friendly.

Acoustic foam is cut into pieces with forms "of egg shells." Not only absorbs sound, but also improves the sound quality and speech in a space which is at the same time both the medium and high frequencies.

"For party rooms and a recording studio, acoustic foam can be used as inexpensive reduction to heat, which are arranged at the corners of a room, or if required mixtures of optimum sound as a bass traps to the echo to minimize" says Shah.

Aucun commentaire:

Enregistrer un commentaire