Great results using only home remedies

There are two things we all love about summer: the warm weather and the BBQ at home with friends and family. However, in order for your grill to taste good, it is important to keep it as clean as possible. This can be a difficult task when you have a stainless steel appliance whose finishes are easily damaged by the wrong products and techniques. In this article, however, we will tell you how to clean your stainless steel grill properly and only with household products.

Cleaning the stainless steel grill: This is how it works with baking powder

1. Prepare a cleaning paste : To make an effective stainless steel grill cleaner, mix 50g of baking soda and 60ml of warm water in a small bowl. Mix well until a paste forms.
2. Apply the paste to the grill grates with clean hands or a rag and leave for at least 20 minutes. Be sure to cover the entire surface, paying special attention to the dirtiest areas. We recommend you take the grill off the grill before applying the paste. So you can cover both sides well. Note : If your stainless steel grill has not been maintained for a long time, you may need a more intensive cleaner to freshen it up. In this case you will need to apply a generous coat of oven cleaner spray to both sides of the grill and leave it in a plastic bag overnight.
3. Clean with a grill brush : After the baking soda paste or oven cleaner has sat on the grill for a while, clean the entire surface with a stainless steel grill brush. Run the brush between and along the sides of the grate to remove any charred residue.
4. Rinse the cooking grate with water and dry : When cleaning is complete, rinse the grate thoroughly, making sure to remove any detergent residue. Pat dry with a clean towel and place back on the grill.

Cleaning the stainless steel grill: tips to keep the grill clean :

• Always preheat your grill before placing food on it. This prevents dirt from sticking to the grid. For the same reason, don't forget to brush your grilled meat with an oil of your choice (butter, olive oil, frying oil) before putting it on the grill.
• Clean the rack after each use.

Flame arrestors and wire brush burners

Clean the flame arrestors with a brush : The flame arrestors are located directly above the burners and form a barrier between the burners and the grill. Food debris can sometimes collect there, which you can remove with a small dry wire brush. Then simply wipe them off with a clean paper towel.

---

Remove food debris from the burners : The burners are located below the flame arresters. Food residue on gas burners can cause uneven heating and damage the burners. Clean them with a small, dry wire brush, paying particular attention to the area of ​​the burner port where the gas exits.

• Note : If you have ceramic burners, do not clean them with a brush. Light the grill for 10 minutes to burn off any leftover food. Once the grill is off and cool, use tongs to remove any large debris.

Clean the stainless steel grid. Clean the venturi tubes with soapy water

Cleaning venturi tubes with soapy water : Venturi tubes are narrow tubes with a series of small holes on the sides and ends. Remove according to the instruction manual and clean with a cloth soaked in soapy water. Then dry.

Clean Debris from the Venturi Tubes : Venturi tubes are easy to collect debris that can clog them and prevent your grill from working properly. Clean them with a small wire brush and use a paper clip to poke the holes. You can also rinse them under the sink if you want.

• Note : Finally, read the instruction manual carefully to reinstall the hoses correctly. Otherwise your grill will not work and may even catch fire.

If you follow these instructions, you can optimally clean your stainless steel grill and it will shine like new. We recommend that you take care of it regularly so that it not only lasts longer but also enjoys a tastier roast.

Try Adblock (Why?)