The opening of the spring group itself is simple

Opening your group properly will save you a lot of headaches and headaches. Accidentally, leave the blanket in place and prepare to spend two to four hours more stacks of stains with leaves you do not even know.

But with some tips and tricks it is possible to open this group at the right time, even if you are not an expert.

Here are some tips on how to open your pool faster, cleaner and cheaper. I recommend that you hire a friend or two to help you.

Preparation: Find a friend. This project is best handled with two people.

Take the following: You will need a brush, rod, netting, hand vacuum, suction hose and chemicals opening kit. You may also need a submersible pump if you want to remove the water from the cover. If you have a nice green pool, a leaf blower or a freezer is essential.

Getting Started: Start by removing, cleaning, and storing the lid. Use a submersible pump to pump water from the top of the lid. Fold the lid and bring it to you. Once you have some time, remove the remains of the blanket with your net and drain the rest of the water. When you have removed the lid, clean and dry it to avoid mold and unpleasant odors. Store the lid in a dry, insect-proof place. Tip: Make sure there are no holes in the lid before removing the water; Otherwise you could empty the pool.

Next steps: Remove all parts for the winter, including the return plugs and the skimmer gadgets. Then replace the return fittings, pressure gauge, drain plugs, skimmer and pump (if removed). Connect all unconnected hoses and make sure they are tight. Tip: The return should be angled at 45 degrees to the skimmer for proper circulation and faster cleaning.

Reduce the water level as necessary. The water level should be about two-thirds of the opening of the skimmer so that dirt can flow into the skimmer.

Use this time to check the equipment, hoses and cuffs. Look over everything, including the pump, the baskets, the filter, the accessories, the hoses, the radiator and other equipment. Make sure nothing is cracked and everything is tight.

Replace all pool devices on the spot. This could be a ladder (after checking the bumper), a step, a roll of solar cover, and so on. Check them everywhere to make sure they are in good condition.

If everything is ok and the water level rises, turn on the pump or drain for at least 30 seconds to fill the pump before filling the set with the filter. Remember to turn off the power before moving the filter handle. With everything that works manually, clean the pool to remove the garbage and clean the walls.

Finally, wait a few days and take a water sample in the nearest pool for water treatment. Nice and easy And there is still time to enjoy the spring.

Kara Redden is a pool enthusiast who passionately strives to make others spend less time in their pool and spend more time with their families. She is a partner of R & R Pools in Halifax and president of the Atlantic Section of the Canadian Pools and Spas Council.

Let's block the advertising! (Why?)