Whether you look at your car as a source of joy or at some point from one place to another, it gets dirty and you need to clean it.
You can bring it to your local car wash and finish it for you. If you want a better job, valet parking would be a good option.
If you choose the options above, this guide is probably not for you, but if you prefer to do it yourself, read on.
If you wash your car regularly, it will at least look good. A simple wash with a bucket of soapy water and a sponge is sufficient, but does not protect in the long run. In fact, dirt, bird droppings, dead insects, road dirt, tree sap and other contaminants can damage the paint if they adhere too long.
If you want to do something more and feel like you have left the showroom, you will receive instructions from our guide on how to do this.
The best way to wash your car.
The first thing to think about is to wash your car or damage the paint. If you see all of these swirl marks on your car's paintwork, it's due to poor washing technology, and you'll need to mix or polish a little to remove it. Every time you wash your car, you risk more damage by rubbing the paint.
A good method for weekly washing and drying is the best way to ensure that any contaminants that can cause long-term damage are removed as soon as possible.
Without regular cleaning and treatment, the exterior of your car may be discolored by UV rays, road debris and any other contaminants your car may be exposed to.
The two main causes of concern are bird droppings and insect remains that contain biological hazards and organic acids that build up on your car paint and cause serious damage.
Another problem is brake dust, which is very corrosive and very sticky.
Keeping these pollutants in your car for a while is a risky business.
Instead of taking this risk, you should plan for one hour a week to properly clean your car.
Wash tools you need
To wash your car, you need a sponge, which can be a natural or synthetic sea sponge, or better a sheepskin or microfibre glove, a good shampoo for the car, two buckets, a garden hose or a pressure washer, a soft brush and a Radbürste. ,
Wash your car
Before you start washing your car, keep in mind the following: What you wear, scratches, watches, jewelry, belts, and clothes that come in contact with the paint.
If you use rags with store tags, you destroy them because they can also cause scratches.
Spray the wheel cleaner on the wheels and leave it for the recommended time. If the dirt is hard you can shake it with a soft brush, rinse it out and move on to the next wheel.
Empty the buckets and rinse all tools used to clean the wheels of your car.
Now you can wash the rest of the car.
Fill your two buckets with water, one with soapy water with a shampoo for high quality cars (do not use liquid to rinse dishes) and the other with clean water for rinsing.
Some experts use three buckets, one for soapy water and two for rinsing, and two washing gloves in different colors, one for the top of the car and one for the bottom panels, which are dirtier.
You can also save a cube only for the wheels.
The buckets with protective grids on the bottom are the best option, as the grain can settle on the bottom of the bucket and clean water remains on top.
First, thoroughly rinse the vehicle with a garden hose or pressure washer to remove any debris that may otherwise be caught while washing the car and could be damaged.
The next step is to physically wash the car.
Wet your sponge or cleaning glove with soapy water and wash the upper part of the vehicle. Instead of washing on the other side, always wash up and down as the car on the lower panels is always dirtier and you do not want to put gravel on top of the car.
Just perform floats to avoid the swirl marks, which are clearly noticeable at different angles to the right. The tourbillon brands are more difficult to eliminate.
When you have completed a small area, rinse your sponge / glove in the bucket with clear water before submerging it in the soapy water. This eliminates spillage and prevents it from getting into your soapy water
If you drop your sponge / glove on the floor, rinse it off before using it again.
If it is hot, rinse each area with your garden hose.
Continue washing and rinse your sponge until the car is completely washed.
It is best to wash first the top half of the car and then the bottom panels.
Do not forget to open the doors and to clean the door and the jams of the doors as well as the door of the gas cap, which is often forgotten.
If your car has collected tar or dead insects, you may need an insect and tar product.
Use your soft brush to reach hard-to-reach areas such as bumper holes and panels that your sponge / mitt can not reach.
Dry your car
Once the car is washed, it's time to dry it. Dry your car to avoid water stains.
There are many ways to dry your car, but it must be done quickly to avoid unpleasant water stains.
A silicone blade is the fastest way to remove excess water from the body. These are made of soft silicone and must not scratch the paint. You probably need to use a towel to clean the places you can not reach.
Microfibre cloths are ideal for drying your car because they fit in any room and are flexible enough not to damage the paint.
Chamois have been around for years and have always been the preferred way to dry your car, but they do not last that long and should never be used if they are tough.
Synthetic Souths have a longer life than the real ones. That's why it's a good alternative.
Tips for drying
- First, dry the windows and mirrors and then inspect the entire vehicle.
- Open the doors, trunk and bonnet and dry the posts.
- Dry the wheels with a separate cloth.
Shine your car, compound, polish and wax.
After washing your car, you need to decide if the paint needs more work to improve it.
If you wash and grow your car on a regular basis, it should be nice and shiny and does not require any work, unless time gives you regular shine and polish.
If the color looks opaque and does not shine, you probably need to work a bit to restore its shine.
Feel the painting with your hand. If it looks grainy and not smooth, you should remove the impurities.
Oxidation and discoloration.
Like most cars, it will eventually disappear under the UV rays of the sun, unless it is protected by a normal polish and wax.
The discolored and highly oxidized lacquers can be restored to a certain extent depending on the state of aging, color and type of lacquer used.
The colors of the light layer can be reduced according to the distance traveled and the number of blends. As soon as the transparent layer fails, you will end up with stained areas that you will have to repaint.
Although traditional paints without a clear coat can be restored, without the protection of the clear coat it is cut directly into the paint and the paint finally disappears completely, exposing the primer underneath.
You will not notice the damage caused by an unprotected car for a short time, but it is there, after about a year, you will find that it gets boring and rough.
How can I fix this?
Although it is not so bad that it needs to be repainted, it can often restore its shine.
First, wash and dry the car as described above and then use the following products to remove unwanted opaque paint.
Clay bar: bar clay varnish and clean is the first step to remove the oxidation.
Their task is only to eliminate the contamination of the paint. Never touch the color. Rather, it slides over a smear layer that must be applied during use. It's a less abrasive way to clean your car.
Select a panel to work on and spray the lubricant. It can be a precision lubricant or soapy water.
Take your tone bar and place it, push it against the body panel and push the bar with gentle pressure in straight lines to medium dimension.
When working on the plate, there is a need for a smooth color. Keep working, even if it is still difficult.
You will notice that the scale gets dirty when it collects impurities. When this happens, knead it and bend it to bury the impurities and discover a clean surface.
If you put clay in the car, you can wash it again to remove any contaminants that have been removed but not removed.
If the scale is soiled, discard it and use a new one.
Compound: A friction compound , also called cutting paste, is a mild abrasive that removes the top layer of damaged paint.
The first step is to use the Tone Bar throughout the vehicle to remove dead paint and debris on the body of your car.
If you have the car in a tone state, continue with the connection. You can do it by hand or with an orbital mop / polisher, but be careful not to go too far.
Make a small area at once and remove it.
Once you're done, it's time to polish.
You can also use cutting products to eliminate small scratches and swirl marks.
Polish your car
Car polish is said to reduce scratches and irregularities in the paint of your car.
Depending on the type of polish used, it works because of the chemical products it contains, or in some cases because it is slightly abrasive and eliminates a minimal color coat.
If you have done the previous procedure to cut the color, you are ready for polishing. If you do not have to cut them, suppose that you have washed the car and finally the clay to get an ultra-cleaner surface.
Polish in hand
Apply the varnish to a pad or cloth and gently rub the area to be polished and spread it gently. It is better to make only one small area at a time.
The Polish is very far away, so you do not need much to do a good job.
Start by working the paint in the paint, you can do it in a circular motion from top to bottom or from one side to the other. It does not really matter if you work with the paint in the paint. follow the contours.
The paint must penetrate into the paint until it is almost transparent.
Check how long the polish should stay in the car, some can be polished immediately and others need time to heal.
Remove paint residues with a soft, clean cloth. For example, use a microfiber cloth and fold the towel during transportation to make sure you always use a clean part of the towel.
Be sure to clean all varnish residues in the plate spaces, joints and badges.
Continue around the vehicle until it is finished and is a shiny car.
machine polishing
If you find the work by hand too much, you can try an electropolisher. With this method, you can get much better and faster results, but you can damage your paint so easily that you keep an eye on it.
Machine polishing is complicated, so cover areas where you do not want to spray the paint.
If you decide to use an electropolishing device, you must apply the paint to the corresponding polishing pad and polish by hand or stretch around the area where you work before turning on the machine. If you do not distribute the paint in the work area, it will fly out of the pad when the machine is turned on. You were warned.
Use enough polish on your pad to work an area for a minute or two.
Hold the pad against the vehicle to start the machine at a slow to medium speed. Move the paint slowly to increase the working speed of the paint. Never remove the color from the paint while it is still rotating.
Hold the seal upright and apply light pressure so that it stays in full contact with the paint. Perform the movements from top to bottom and then overlapping from left to right for the email to do the job.
Never dry, it is when the paint dries, the paint must work to get good results, but it must stop when the paint becomes transparent.
Remove the last paint residue with a finish pad or a lid on the machine. You can also do this by hand if you want to use a soft towel.
Grow your car
Now that you have spent all of your time painting your paint, it is time to seal it with a wax of good quality.
The wax works by simply smoothing the paint surface of the body and filling the tiny imperfections and bumps of a vehicle paint. Creates an almost smooth finish on the body of the vehicle, resulting in a beautiful and very bright finish.
You can get waxes in the form of liquids or pastes, but you will find that liquids are easier to apply and offer the same protection as a paste.
Always put the wax on the screen, because if it dries too fast, it can be difficult to polish it.
It's much easier to create a section while editing the entire car at the same time.
If you want more shine and depth, apply the thinnest layers you can. If you try to apply a thick coat, it's just harder to remove, and it does not make much difference. Many thin layers are the way.
After each coat, allow to dry and polish with a soft cloth before applying another coat if necessary.
Apply wax every two to three months to keep the vehicle in perfect condition.
As with polishing, you can apply wax manually or by machine.
Paint a painting
Putty putty is a synthetic wax that performs the same function as natural waxes to seal gloss and protect color.
They tend to remove water and dirt much better than waxes, which means your car stays clean for longer, and it makes maintenance easier for future washings.
Putties have a different gloss and glassy surface than the warm, deep gloss of a car wax.
They claim to protect the vehicle more efficiently than waxes, and can protect their car for six months to a year.
In fact, they adhere to the paint surface to prevent discoloration and oxidation.
So what do we recommend? It is a difficult solution for an excellent appearance and a bright shine. A traditional wax is the best solution, while a sealer offers a longer protection. So you can use the sealer to protect the paint from wax in the winter. for use in the summer.
Keep your car between the waxes.
Regular and correct cleaning with high-quality cleaning agents is the key. Avoid parking under trees that could spill water in your car.
Take action if your car detects a pollutant, such as the sap of a tree or bird droppings, as these will be difficult to remove after curing and will damage the paint.
Glass and exterior
Now that the color has been illuminated all the time, it would be a pity not to finish the exterior of the vehicles.
Always clean your windows in the end.
Do not try to clean the windows, as this will dry the window cleaner, which can cause pain.
Start with the hardest glass, windshield and rear window, which are usually the largest and have a challenging angle.
For large windows, it is advisable to address them in smaller areas. This prevents the cleaning cloth from getting too dirty and distributes this dirt around the rest of the window.
Apply a car window cleaner to a soft, clean cloth or microfibre cloth. If you try to spray the cleaner directly onto the glass, you probably cover it with your newly polished paint.
Clean one side of the glass at a time by applying different strokes inside and outside, horizontal lines on the outside and vertical lines on the inside, so you can better examine the inside of the glass. Look for scratches that will help you determine which side of the window requires extra work. ,
After cleaning, you can use a scale to remove all impurities stuck in the glass. Use hot water in an evaporator as a lubricant.
Try to keep the cloths used in the windows separate from the cloths used for polishing.
You can buy a secondary market product such as For example, use Rain x to protect your exterior windows so that water can drip off.
You can also use wax the same way you protect your paint. A thin layer of wax is enough.
Apply in a circular motion, wait until it dries and polishes.
outdoor setting
Chromium was fashionable many years ago, but the weather initially changed with black trim and bumpers for today's cars, all of which were color coded.
If you have a classic with lots of chrome, make it shine with a good chrome cleaner and polisher as well as a lot of elbow.
If your vehicle has a black or unpainted edge, you may have noticed discoloration due to these unbearable UV rays. In this case, you can reset the exposure with a good quality trimmer.
Another reason why your plate is erased (white chalk optics) is that the paint has dried and is on the surface. In this case, you will need a solvent that dissolves the wax before you protect it with a plastic product.
Nothing to see for cars of all colors.
Most headlight lenses are now made of plastic and can degrade over time, which can affect the overall appearance of your freshly washed and polished car.
The reason they fade and have this opaque / yellow / cloudy / hazy aspect is due to our old UV friend.
They can be restored and it is not difficult to do so if you use the right products.
The first thing you should try is a plastic polisher for tablets. Most of them have descending abrasives that remove the top layer of your lens to expose a new lens, just like a cutting mass in your color.
You can do this by hand or use an orbital buffer for faster results.
Apply the paint to the lens with firm pressure and let it penetrate horizontally, vertically or circularly until the paint has disappeared.
Clean the lens with a clean cloth and check it. Repeat the process until the lens is as good as new.
Tires are essential to the overall appearance of your car and are often overlooked as they degrade over time.
Washing the tires with a car shampoo can be anything to get rid of dirt.
When you finish a bandage of high quality tires, you get a new look.
Applying a bandage is pretty easy, there are a few things to keep in mind.
First, do not put on too much dressing as a small thing goes very far.
Simply apply the bandage to a towel / towel designed specifically for your tires and rub it off for a good coverage.
Do not leave the bandage on the steering wheel or on the car, especially if you use an aerosol.
If your engine needs cleaning, you must do so before cleaning the rest of the vehicle.
Many people worry about cleaning the engine due to electricity, but this should not be a problem when it comes to protecting electrical components.
The first thing you should do is protect the electricity, use food sacks and a plastic wrap to achieve this.
The engine should be hot, but not hot.
Choose a good quality engine cleaner / degreaser and spray around the engine to reach any corners and areas that are hard to reach. Let it work for a few minutes.
You can shake the cleaner with a brush, remove stubborn dirt and spray again if necessary
Rinse with a hose or pressure washer. However, if you are using a high-pressure cleaner, make sure that the motor is not subjected to excessive pressure, separating the wires and allowing the plastic to cover the electronic components.
If the parts still look dirty, reapply and rinse the degreaser.
Remove plastic bags and food wrap from electrical appliances and allow them to dry or rub with a microfiber cloth.
Complete with a high-quality rubber / vinyl protection for all plastics and pipes.
Cleaning the interior is an important part of a clean car, but there you spend most of your time. Why do not you want it to be clean?
Start by wiping the dashboard and vinyl trim.
Remove and clean the mats before vacuuming carpets and vacuum cleaners. Start with the seats before you attack the carpets. Always work hard, otherwise you will end up working. Again and again under the effect of dirt. to newly aspirated areas.
A dedicated vacuum cleaner is a good option, but there is no reason why you can not use a large household vacuum with attached tools.
Once the carpet, seats, door panels, and all other parts of the car have been exhausted, it's time to tidy up everything.
Start with the door panels with a high-quality detergent to remove dirt and clean it with a clean cloth.
Then go to the board and make a good cleaning again.
Use a small brush or toothbrush to penetrate hard-to-reach areas.
Check the carpets and upholstery for stains, dirt and shampoo. If necessary, you should clean them at least once a year, even if they do not look dirty.
Do not forget to clean the trunk.
cleaning equipment
When you have finished cleaning your car, you should clean all cleaning equipment before storing it.
Clean and rinse all buckets with clean water.
You can wash microfibre cloths and gloves in your washing machine or by hand, but do not use cloth conditioners.
Aucun commentaire:
Enregistrer un commentaire