How to get the best performance out of your solar modules

How to use your solar panels optimally

1. Make sure that the thermally conductive substrate has been used.

"When manufacturing the panels, a heat-conducting substrate must be used to dissipate excess heat from the glass layer."

2. Choose your positioning carefully

"The installer should consider lifting the panels a few inches from the ceiling. You may need to add some type of ventilation system to the solar generator to ensure free airflow above and below the panels when they are in place, "says Jonah.

"For example, fans or evaporative water cooling could be used. When choosing the location of the photovoltaic system, take into account the installation of panels with good natural ventilation, e.g. B. in cross winds. "

3. Panel cleaning

"Be careful not to water your panels during the hottest time of the day as the sudden temperature shock can break the glass and irreversibly damage your panels."

"If your panels are covered in snow (which is rarely the case in Australia), do not try to remove them as this could damage the panels. Let it slide by itself or hire a professional team to clean the panels if necessary. "

cleaning Tips

• Clean your solar panels if they are unusually dirty or covered with dirt and falling birds, as this can limit the amount of light they absorb.
• Never use abrasives or mineral-rich water to wash your panels, as this could damage them.

4. Temperature control

"Always take the temperature coefficient into account. Operating at temperatures below the expected ambient temperature leads to positive results and increases the efficiency and performance of the panel. In warmer environments, modules with a temperature coefficient may be required to reduce the possible effects of temperature. "

You May Also Like:

How to clean your solar panels

5 Ways To Improve Your Home's Exterior For Less Than $ 20,000

Let's block the ads! (Why?)