CLEANING fanatics are rejoicing over a quick and easy trick that will leave your shower spotless - and it costs just 35p.
Cleaning your shower head, with all its drawbacks, can take a while, especially if you avoid using bleach.
But don't worry, because an expert has shared his super-simple trick that will have him glowing in no time.
Home Spritz cleaning specialist Nick Ross revealed that all you need is an item you may already have in your kitchen cupboard .
And even if you don't have it, it only costs 35p to collect from supermarkets like Tesco.
He swears by using white vinegar to remove gunk buildup from showerheads because its acidic properties help dissolve mineral buildup.
Nick explained: "Simply fill a plastic bag with white vinegar and let the showerhead soak for a few hours, or overnight if it is difficult for scale to form.
"After soaking, rinse the showerhead thoroughly and scrub any stubborn spots with an old toothbrush."
However, be warned that this handy trick cannot be used on all shower heads in case you damage them.
He explains, "Keep in mind that this approach should only be used for stainless steel showerheads.
Most read in Fabulous
"Items with delicate surfaces such as brass should not be soaked for longer than 30 minutes."
Not only is vinegar good for cleaning your shower, but it's also great for removing rust.
Nick revealed that mixing it with salt can create a solution that easily removes it from mirrors and tools.
The acetic acid in white vinegar acts as a mild acid and dissolves light surface rust, while the salt provides a mild abrasive action that helps loosen and remove it.
He explains: "Mix white vinegar and table salt to form a thick paste. Apply the paste to the rusted area and leave it on for 15 to 30 minutes to allow the acidity of the vinegar to take effect.
"Then use a sponge or non-abrasive cloth to gently rub the area.
"Keep in mind that this method is only effective on smaller rust spots. "If it's more stubborn rust, you may need a stronger solution."
Nick also shared three other home cleaning tips "that really work."
One is to use drill brushes, which are small attachments that fit on any drill, for thorough cleaning.
While it may not be your first instinct to bring a power tool into the shower, these brushes can be surprisingly effective and make scrubbing easier.
He explains: "We use drill brushes all the time.
"Drill brushes are great for deep cleaning, but a little know-how will help prevent scratches.
"Choose a brush with the right firmness for the job: softer for bathtubs and showers, slightly sturdier for floors.
Simply fill a plastic bag with white vinegar and soak the showerhead for a few hours. Then rinse the showerhead thoroughly and scrub any stubborn spots with an old toothbrush.
Nick Ross,
"Start with a low speed on your drill and work your way up.
"A light touch combined with the right brush works wonders to achieve a glossy finish without the risk of damage."
However, if you have scratches, you can use toothpaste to repair them.
Although it doesn't work on all surfaces, it significantly improves small scratches on furniture, irons, cutlery and even mirrors.
Nick explains: "Put a small amount of toothpaste on a damp cloth and then rub gently in circular motions over the scratch.
How often should I clean my shower head?
The bathroom is a place where we find a lot of dirt and grime since it is used daily.
And now experts have revealed how often you should clean it to prevent bacteria from forming.
In general, experts say that you should clean your bathroom thoroughly at least once a week.
This includes cleaning the toilet, sink, mopping the floors, and cleaning the bathtub and shower.
And for a thorough cleaning, professionals recommend doing this about once every two weeks.
The aim is to thoroughly remove limescale from pipes, taps and the shower.
"When you're finished, wipe off any remaining toothpaste with a clean, dry cloth."
Nick's other and final tip will help remove those pesky sticker stains without damaging surfaces.
He explains that a hairdryer can be a useful tool for removing stubborn stickers without harsh chemicals.
Applying heat can help loosen the adhesive, making it easier to peel off.
Nick says: "I often breathe new life into jars, so I tried removing the label from the one I was about to clean.
READ MORE SUN STORIES
"I was very impressed with how well a hair dryer removed the glue.
"Apply heat for about 30 seconds, then gently lift a corner of the sticker with your fingernail or a thin, flat tool and the sticker will immediately come off."
Aucun commentaire:
Enregistrer un commentaire